Benin

IEC standard voltages

Instrument transformers - Part 1: Current transformers

Instrument transformers - Part 2: Inductive voltage transformers

International Electrotechnical Vocabulary. Chapter 191: Dependability and quality of service

International Electrotechnical Vocabulary - Part 351: Control technology

International Electrotechnical Vocabulary (IEV) - Part 603: Generation, transmission and distribution of electricity - Power systems planning and management

Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2: Special requirements for ammeters and voltmeters

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3: Special requirements for wattmeters and varmeters

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4: Special requirements for frequency meters

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5: Special requirements for phase meters, power factor meters and synchroscopes

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 7: Special requirements for multi-function instruments

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 8: Special requirements for accessories

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 9: Recommended test methods

Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories

Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables). Part 2: General and construction requirements

IEC standard current ratings

High-voltage test techniques - Part 1: General definitions and test requirements

High-voltage test techniques - Part 2: Measuring systems

Lamp caps and holders together with gauges for the control of interchangeability and safety - 12-month subscription to online database comprising all parts of IEC 60061.

Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

Audio, video and similar electronic apparatus - Safety requirements

Power transformers - Part 10: Determination of sound levels

Power transformers - Part 10-1: Determination of sound levels - Application guide

Double-capped fluorescent lamps - Performance specifications

Primary batteries - Part 2: Physical and electrical specifications

Lead-acid starter batteries - Part 1: General requirements and methods of test

Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals

Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles

Power capacitors for induction heating installations - Part 1: General

Series capacitors for power systems - Part 1: General

Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks

Glow-starters for fluorescent lamps

High-pressure mercury vapour lamps - Performance specifications

Low-pressure sodium vapour lamps - Performance specifications

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines

Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria

Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics

Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens

Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods

Electric cables - Tests on extruded oversheaths with a special protective function

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods

Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells

Measuring relays and protection equipment - Part 27: Product safety requirements

Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J

Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F

Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices

High-voltage fuses - Part 1: Current-limiting fuses

Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems

Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements

Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories

Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock

Electric irons for household or similar use - Methods for measuring performance

Vacuum cleaners for household use - Methods of measuring the performance

Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement

Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines

Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers

Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances

Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids

Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers

Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances

Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods

Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters

Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans

Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors

Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails

Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam

Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks

Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines

Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for automatic machines for floor treatment for commercial and industrial use

Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances

Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens

Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

Tungsten halogen lamps (non vehicle) - Performance specifications

Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions

Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock

Low-voltage electrical installations - Part 6: Verification

Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower

Low-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations

Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises

Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 2: Mica paper

Lampholders for tubular fluorescent lamps and starterholders

Graphical symbols for use on equipment - 12-month subscription to online database comprising all graphical symbols published in IEC 60417

Mineral insulating oils in electrical equipment - Supervision and maintenance guidance

Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle)

Safety requirements for electronic flash apparatus for photographic purposes

Audiovisual, video and television equipment and systems. Part 18: Connectors for automatic slide projectors with built-in triacs for audiovisual application

Luminaires. Part 2: Particular requirements. Section One: Fixed general purpose luminaires

Luminaires - Part 2-11: Particular requirements - Aquarium luminaires

Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights

Luminaires. Part 2: Particular requirements. Section Seventeen - Luminaires for stage lighting, television and film studios (outdoor and indoor)

Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications

Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

Luminaires - Part 2: Particular requirements - Section 2: Recessed luminaires

Luminaires - Part 2-20: Particular requirements - Lighting chains

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

Luminaires - Part 2: Particular requirements - Section 23: Extra low voltage lighting systems for filament lamps

Luminaires - Part 2: Particular requirements - Section 25: Luminaires for use in clinical areas of hospitals and health care buildings

Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

Luminaires - Part 2-5: Particular requirements - Floodlights

Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps

Luminaires. Part 2: Particular requirements. Section Seven: Portable luminaires for garden use

Luminaires. Part 2: Particular requirements. Section Nine: Photo and film luminaires (non-professional)

Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests

Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

Medical electrical equipment - Part 2-17: Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment

Medical electrical equipment - Part 2-27: Particular requirements for the safety, including essential performance, of electrocardiographic monitoring equipment

Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis

Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment

Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators

Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment

Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment

Medical electrical equipment - Part 2-51: Particular requirements for safety, including essential performance, of recording and analysing single channel and multichannel electrocardiographs

Graphical symbols for diagrams - 12-month subscription to online database comprising parts 2 to 13 of IEC 60617

High-pressure sodium vapour lamps

Switches for household and similar fixed-electrical installations - Part 1: General requirements

Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)

Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings

Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines

Fire hazard testing - Part 9-1: Surface spread of flame - General guidance

Household microwave ovens - Methods for measuring performance

Automatic electrical controls for household and similar use - Part 1: General requirements

Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators

Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks

Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls

Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors

Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems

Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches

Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls

Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

Application guide for the selection of fuse-links of high-voltage fuses for transformer circuit application

Medical electrical equipment - Characteristics and test conditions of radionuclide imaging devices - Anger type gamma cameras

Optical fibre cables - Part 4-10: Aerial optical cables along electrical power lines - Family specification for OPGW (Optical Ground Wires)

Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)

Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods

Plugs and socket-outlets for household and similar purposes - Part 1: General requirements

Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs

Plugs and socket-outlets for household and similar purposes - Part 2-2: Particular requirements for socket-outlets for appliances

Plugs and socket-outlets for household and similar purposes - Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations

Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests

Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test

Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements

IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c.

IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, a.c. and d.c.

Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads

Information technology equipment - Safety - Part 1: General requirements

Information technology equipment - Safety - Part 23: Large data storage equipment

General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test

General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking

Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents

Power installations exceeding 1 kV a.c. - Part 1: Common rules

Safety of primary and secondary lithium cells and batteries during transport

General requirements for residual current operated protective devices

Residual strength of string insulator units of glass or ceramic material for overhead lines after mechanical damage of the dielectric