Burkina Faso

International standard of resistance for copper

IEC standard voltages

International Electrotechnical Vocabulary (IEV) - Part 461: Electric cables

Lamp caps and holders together with gauges for the control ofinterchangeability and safety. Part 1: Lamp caps

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

Power transformers - Part 1: General

Power transformers - Part 10: Determination of sound levels

Power transformers - Part 2: Temperature rise for liquid-immersed transformers

Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air

Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors

Power transformers - Part 5: Ability to withstand short circuit

Glow-starters for fluorescent lamps

Guidance for the selection of high-voltage A.C. cable systems

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring

Conductors of insulated cables

Electric cables - Tests on extruded oversheaths with a special protective function

Edison screw lampholders

Low-voltage fuses - Part 1: General requirements

Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K

Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems

High-voltage fuses - Part 1: Current-limiting fuses

Appliance couplers for household and similar general purposes - Part 1: General requirements

Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus

Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame

Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles

Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus

Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame

Tests on electric cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus

Household and similar electrical appliances - Safety - Part 1: General requirements

Household and similar electrical appliances - Safety - Part 1: General requirements

Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids

Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers

Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens

Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks

Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons

Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors

Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances

Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use

Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances

Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets

Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers

Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions

Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors

Low voltage electrical installations - Part 6: Verification

Lampholders for tubular fluorescent lamps and starterholders

Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings

Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)

Degrees of protection provided by enclosures (IP Code)

Thermocouples - Part 1: EMF specifications and tolerances

Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system

Luminaires - Part 1: General requirements and tests

Luminaires. Part 2: Particular requirements. Section One: Fixed general purpose luminaires

Luminaires - Part 2-2: Particular requirements - Recessed luminaires

Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires

Luminaires - Part 2-5: Particular requirements - Floodlights

Switches for household and similar fixed-electrical installations - Part 1: General requirements

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures

Dimensions of low-voltage switchgear and controlgear. Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations

Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps

Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General

Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness

Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath

Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions

Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 ?C of filling compounds

Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 ?C and 100 ?C of filling compounds

Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven

Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests

Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds

Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths

Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths

Miscellaneous lampholders - Part 1: General requirements and tests

Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14

Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules

Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for adaptors

Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations

Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets

Hard-drawn aluminium wire for overhead line conductors

Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests

Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test

Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements

Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation

Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation

Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics

Photovoltaic devices - Part 10: Methods of linearity measurement

Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices

Photovoltaic devices - Part 4: Reference solar devices - Procedures for establishing calibration traceability

Photovoltaic devices - Part 9: Solar simulator performance requirements

IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment

Self-ballasted fluorescent lamps for general lighting services - Safety requirements

Self-ballasted fluorescent lamps for general lighting services - Safety requirements

Self-ballasted lamps for general lighting services - Performance requirements

Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ? 16 A per phase)

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements

Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers). General and safety requirements

Round wire concentric lay overhead electrical stranded conductors

Protection against electric shock - Common aspects for installation and equipment

Bayonet lampholders

Double-capped fluorescent lamps - Safety specifications

Single-capped fluorescent lamps - Safety specifications

Lamp controlgear - Part 1: General and safety requirements

Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires

Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)

Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps

Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)

Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps

Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)

Conduit systems for cable management - Part 1: General requirements

Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground

Overhead electrical conductors - Creep test procedures for stranded conductors

Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 1: Photovoltaic off-grid application

Low-voltage switchgear and controlgear assemblies - Part 1: General rules

Equipment for general lighting purposes - EMC immunity requirements

Miscellaneous lamps

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems

Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers

Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods

Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing

Power capacitors - Low-voltage power factor correction banks

Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements

Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval

Safety of power converters for use in photovoltaic power systems - Part 1: General requirements

Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters

Photovoltaic (PV) stand alone systems - Design verification

Photovoltaic pumping systems - Design qualification and performance measurements

High-voltage switchgear and controlgear - Part 1: Common specifications

High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers

High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches

High-voltage switchgear and controlgear - Part 103: Switches for rated voltages above 1 kV up to and including 52 kV

High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV

High-voltage switchgear and controlgear - Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above

High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV

High-voltage switchgear and controlgear - Part 202: High-voltage/ low-voltage prefabricated substation

Household electrical appliances - Measurement of standby power

Protection against lightning - Part 2: Risk management

Protection against lightning - Part 3: Physical damage to structures and life hazard

Protection against lightning - Part 4: Electrical and electronic systems within structures

Temperature - Electromotive force (EMF) tables for pure-element thermocouple combinations

Battery charge controllers for photovoltaic systems - Performance and functioning

Household refrigerating appliances - Characteristics and test methods - Part 1: General requirements

Household refrigerating appliances - Characteristics and test methods - Part 2: Performance requirements

Household refrigerating appliances - Characteristics and test methods - Part 3: Energy consumption and volume

Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications

Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses

Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications

Recommendations for renewable energy and hybrid systems for rural electrification - Part 1: General introduction to IEC 62257 series and rural electrification

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-5: Integrated system - Selection of stand-alone lighting kits for rural electrification