Zambia

Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets

Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)

Instrument transformers - Part 3: Combined transformers

Lamp caps and holders together with gauges for the control ofinterchangeability and safety. Part 1: Lamp caps

Audio, video and similar electronic apparatus - Safety requirements

Environmental testing - Part 1: General and guidance

Environmental testing - Part 2-1: Tests - Test A: Cold

Environmental testing - Part 2-14: Tests - Test N: Change of temperature

Environmental testing - Part 2-18: Tests - Test R and guidance: Water

Environmental testing - Part 2-2: Tests - Test B: Dry heat

Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices

Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock

Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state

Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections

Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests

Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing

Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)

Environmental testing - Part 2-70: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands

Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

Double-capped fluorescent lamps - Performance specifications

Primary batteries - Part 1: General

Primary batteries - Part 2: Physical and electrical specifications

Primary batteries - Part 3: Watch batteries

Primary batteries - Part 4: Safety of lithium batteries

Primary batteries - Part 5: Safety of batteries with aqueous electrolyte

Method for the determination of the proof and the comparative tracking indices of solid insulating materials

Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links

Miniature fuses - Part 2: Cartridge fuse-links

Miniature fuses - Part 3: Sub-miniature fuse-links

Glow-starters for fluorescent lamps

High-pressure mercury vapour lamps - Performance specifications

Low-pressure sodium vapour lamps - Performance specifications

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements

Conductors of insulated cables

Edison screw lampholders

Rubber insulated flexible cables and cords with circular conductors and a rated voltage bit exceeding 750 V

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements

Sound system equipment. Part 1: General

Sound system equipment - Part 4: Microphones

Low-voltage fuses - Part 1: General requirements

Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems

Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V

High-voltage fuses - Part 2: Expulsion and similar fuses

Calculation of the continuous current rating of cables (100% load factor)

Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements

Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables

Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables

Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame

Household and similar electrical appliances - Safety - Part 1: General requirements

Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines

Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums

Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers

Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows

Household and similar electrical appliances - Safety - Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment

Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers

Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances

Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances

Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids

Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care

Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers

Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens

Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks

Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons

Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters

Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods

Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors

Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers

Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills

Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans

Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps

Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens

Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails

Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers

Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric hot cupboards

Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers

Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie

Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations

Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances

Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances

Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam

Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds

Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances

Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines

Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances

Household and similar electrical appliances - Safety - Part 2-60: Particular requirements for whirlpool baths and whirlpool spas

Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal storage room heaters

Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks

Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines

Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances

Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment and floor cleaning machines, for industrial and commercial use

Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction appliances, for industrial and commercial use

Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use

Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines

Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines

Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals

Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use

Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters

Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters

Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines

Household and similar electrical appliances - Safety - Part 2-76: Particular requirements for electric fence energizers

Household and similar electrical appliances - Safety - Part 2-77: Particular requirements for pedestrian controlled mains-operated lawnmowers

Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues

Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances

Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans

Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats

Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines

Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers

Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunning equipment

Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor

Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances

Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens

Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers

Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears

Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for shutters, awnings, blinds and similar equipment

Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers

Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods

Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

Tungsten halogen lamps (non vehicle) - Performance specifications

Lampholders for tubular fluorescent lamps and starterholders

Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U_m = 1,2 kV) up to 30 kV (U_m = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (U_m = 7,2 kV) up to 30 kV (U_m = 36 kV)

Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method

Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method

Degrees of protection provided by enclosures (IP Code)

Luminaires - Part 1: General requirements and tests

Luminaires. Part 2: Particular requirements. Section One: Fixed general purpose luminaires

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells

High-pressure sodium vapour lamps - Performance specifications

Specification for vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements

Specification for vulcanized fibre for electrical purposes. Part 2: Methods of test

Switches for household and similar fixed-electrical installations - Part 1: General requirements

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches

Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)

Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables

Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations

Hand-held motor-operated electric tools - Safety - Part 1: General requirements

Electrical accessories - Cord sets and interconnection cord sets

Safety of laser products - Part 1: Equipment classification and requirements

Plugs and socket-outlets for household and similar purposes - Part 1: General requirements

Plugs and socket-outlets for household and similar purposes - Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations

Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets

Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices

Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests

Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test

Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation

Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation

Single-capped fluorescent lamps - Performance specifications

Photovoltaic devices. Part 1: Measurement of photovoltaic current-voltage characteristics

Photovoltaic devices - Part 10: Methods of linearity measurement

Photovoltaic devices. Part 2: Requirements for reference solar cells

Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data

Photovoltaic devices - Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method

Photovoltaic devices - Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices

Photovoltaic devices - Part 8: Measurement of spectral response of a photovoltaic (PV) device

Photovoltaic devices - Part 9: Solar simulator performance requirements

Ballasts for tubular fluorescent lamps - Performance requirements

Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements

Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements

AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements

Electroacoustics - Sound calibrators

Low-voltage switchgear and controlgear - Part 1: General rules

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors

Information technology equipment - Safety - Part 1: General requirements

Self-ballasted lamps for general lighting services - Safety requirements

Self-ballasted lamps for general lighting services - Performance requirements

Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units

Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)

Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)

Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ? 75 A and subject to conditional connection

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test

Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test

Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 1: General rules.

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 2-2: Applicability of the general rules to RCCB's functionally dependent on line voltage

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-2: Applicability of the general rules to RCBO's functionally dependent on line voltage

General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test

Switches for appliances - Part 1: General requirements

Switches for appliances - Part 2-1: Particular requirements for cord switches

Switches for appliances - Part 2-4: Particular requirements for independently mounted switches

Switches for appliances - Part 2-5: Particular requirements for change-over selectors

Round wire concentric lay overhead electrical stranded conductors

Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria

Metal halide lamps - Performance specification

Double-capped fluorescent lamps - Safety specifications

Single-capped fluorescent lamps - Safety specifications

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval

Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements

Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules

Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 2: Test procedures

Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation

UV test for photovoltaic (PV) modules

Lamp controlgear - Part 1: General and safety requirements

Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)

Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps

Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps

Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)

Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps

Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)

Conduit systems for cable management - Part 1: General requirements

Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems

Wind turbines - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines

Miscellaneous lamps

Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval

Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing

Photovoltaic (PV) array - On-site measurement of current-voltage characteristics

Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating

Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements

Instrument transformers - Part 2: Additional requirements for current transformers

Instrument transformers - Part 3: Additional requirements for inductive voltage transformers

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications

LED modules for general lighting - Safety specifications

Discharge lamps (excluding fluorescent lamps) - Safety specifications

Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment

Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)

Electricity metering equipment (a.c.) - Particular Requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)

Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)

Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only)

Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements

Electricity metering - Payment systems - Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2)

Electricity metering - Payment systems - Part 52: Standard transfer specification (STS) - Physical layer protocol for a two-way virtual token carrier for direct local connection

Electricity metering - Data exchange for meter reading, tariff and load control - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange

Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol

Electricity metering - Data exchange for meter reading, tariff and load control - Part 53: COSEM application layer

Electricity metering equipment (AC) - Acceptance inspection - Part 11: General acceptance inspection methods

Electricity metering equipment (AC) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2)

Electricity metering equipment (AC) - Acceptance inspection - Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2)

Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval

Safety of power converters for use in photovoltaic power systems - Part 1: General requirements

Utility-interconnected photovoltaic inverters - Test procedure of islanding prevention measures

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications

Protection against lightning - Part 1: General principles

Protection against lightning - Part 3: Physical damage to structures and life hazard

Protection against lightning - Part 4: Electrical and electronic systems within structures

Grid connected photovoltaic systems - Minimum requirements for system documentation, commissioning tests and inspection

Alarm systems - Part 2: Electromagnetic compatibility - Immunity requirements for components of fire and security alarm systems

Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements

Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity

Photovoltaic (PV) modules - Ammonia corrosion testing

LED modules for general lighting - Performance requirements

Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units

Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume resistivity of photovoltaic encapsulants and other polymeric materials

Junction boxes for photovoltaic modules - Safety requirements and tests

Photovoltaic inverters - Data sheet and name plate

Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC

Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing

Testing equipment for electrical energy meters

Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals

Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals

Electricity metering - Glossary of terms

Electricity metering - Payment systems - Part 21: Framework for standardization

Electricity metering equipment - Dependability - Part 11: General concepts

Electricity metering equipment - Dependability - Part 21: Collection of meter dependability data from the field

Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide

Solar photovoltaic energy systems - Terms and symbols

Photovoltaic (PV) arrays - Design requirements

Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing

Photovoltaic (PV) modules - Test methods for the detection of potential-induced degradation - Part 1: Crystalline silicon

Utility-interconnected photovoltaic inverters - Test procedure for low voltage ride-through measurements

Terrestrial photovoltaic (PV) modules - Guideline for increased confidence in PV module design qualification and type approval

Testing equipment for electrical energy meters

Electricity metering - Glossary of terms

Electricity metering equipment - Dependability - Part 11: General concepts

Electricity metering equipment - Dependability - Part 21: Collection of meter dependability data from the field

Information technology - Implementation and operation of customer premises cabling - Part 1: Administration

Information technology -- Syntactic metalanguage -- Extended BNF

Information technology - Generic cabling for homes

Information technology - Security techniques - Network security - Part 1: Overview and concepts

Information technology -- Security techniques -- Network security -- Part 2: Guidelines for the design and implementation of network security

Information technology -- Security techniques -- Network security -- Part 3: Reference networking scenarios -- Threats, design techniques and control issues

Information technology -- Security techniques -- Network security -- Part 4: Securing communications between networks using security gateways

Information technology -- Security techniques -- Network security -- Part 5: Securing communications across networks using Virtual Private Networks (VPNs)