Uzbekistan

Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation

Common test methods for insulating and sheathing materials of electrical cables - Part 5: Methods specific to filling compounds - Section 1: Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 ?C - D.C. resistivity at 23 ?C and 100 ?C

Safety of laser products - Part 1: Equipment classification and requirements

Methods of test for winding wires - Part 1: General

Methods of test for winding wires - Part 2: Determination of dimensions

Winding wires - Test methods - Part 3: Mechanical properties

Winding wires - Test methods - Part 4: Chemical properties

Methods of test for winding wires - Part 5: Electrical properties

Methods of test for winding wires - Part 6: Thermal properties

Telecontrol equipment and systems. Part 4: Performance requirements

Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs

Plugs and socket-outlets for household and similar purposes - Part 2-2: Particular requirements for socket-outlets for appliances

Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets

Stationary lead-acid batteries - General requirements and test methods - Part 2: Valve regulated types

IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.

IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, a.c. and d.c.

Low-voltage switchgear and controlgear - Part 1: General rules

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)

Information technology equipment - Safety - Part 1: General requirements

Information technology equipment - Safety - Part 21: Remote power feeding

Information technology equipment - Safety - Part 22: Equipment to be installed outdoors

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices

Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held current clamps for electrical measurement and test

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

Safety of transportable motor-operated electric tools - Part 2: Particular requirements for band saws

Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus

Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements

Electronic ripple control receivers for tariff and load control

Time switches for tariff and load control

Switches for appliances - Part 1: General requirements

Protection against electric shock - Common aspects for installation and equipment

Data exchange for meter reading, tariff and load control - Local bus data exchange

Radiotherapy simulators - Functional performance characteristics

Radiotherapy equipment - Coordinates, movements and scales

Live working - Portable equipment for earthing or earthing and short-circuiting

Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements

Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus

Electrical apparatus for use in the presence of combustible dust - Part 1-2: Electrical apparatus protected by enclosures and surface temperature limitation - Selection, installation and maintenance

Electrical apparatus for use in the presence of combustible dust - Part 10: Classification of areas where combustible dusts are or may be present

Electrical apparatus for use in the presence of combustible dust - Part 11: Protection by intrinsic safety 'iD'

Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation

Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)

Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation 'mD'

Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 1: Methods for determining the minimum ignition temperatures of dust

Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 3: Method for determining minimum ignition energy of dust/air mixtures

Electrical apparatus for use in the presence of combustible dust - Part 3: Classification of areas where combustible dust are or may be present

Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity

Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the contrast ratio and veiling glare index

Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 7: Determination of the modulation transfer function

Live working - Conformity assessment applicable to tools, devices and equipment

Residual current operated circuit-breakers for household and similar use - Part 3-1: Particular requirements for RCDs with screwless-type terminals for external copper conductors

Residual current operated circuit-breakers for household and similar use - Part 3-2: Particular requirements for RCDs with flat quick-connect terminations

Residual current operated circuit-breakers for household and similar use - Part 3-3: Specific requirements for RCDs with screw-type terminals for external untreated aluminium conductors and with aluminium screw-type terminals for use with copper or with aluminium conductors

Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 1: General requirements

Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V

Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules

Three-digit code for designation of colour rendering and correlated colour temperature

Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers